EPOXY ADHESIVE – STA 305
STA-305 is a mixture of solvent free highly clear epoxy resin and clear graded hardner to be used in joining various glass , metal and marble products over various substrate to produce high strength bonds between the respective surfaces.
With Metal fixing
With Glass fixing
Resistant to many kind of chemicals
Highly Resistant to wear and tear
Excellent Flow ability
Longer pot life
Mix all the material in the appropriate proportion as per described on the product manual.
Surface Preparation: Step 1- clean the surface from all loose dust particle by using a vacuum cleaner or dry cloth.
Step 2- apply a jet of warm to hot water to remove the sticky particle ove the surface.
Step3- Use light conc. HCL or H2SO4 to degrease the surface and finally clean it with normal water after 2-3 hours of applied acids.
Precautions & Limitations:
Professionals should Wear personal protective equipment (PPE). Avoid contact with the eyes and skin. In case of direct contact and irritation, it should be washed off immediately with soap and warm water. Avoid breathing vapours, mist or gas.
- Cement Plaster
- Gypsum Plaster
- Some plastics
Resin & Hardner
Same as advantage and benefits
Spills & Disposal:
In case of spills, sweep up and shovel the spilled material. Keep spilled material in suitable, closed containers for disposal. Soak up with an absorbent such as clay, sand or other suitable material. Flush area with water to remove trace residue. Do not allow the product to reach the sewage system. Waste must be disposed of in accordance with federal, state or local regulations, as applicable.
As per described on product packaging
Storage & Handling:
Keep In a cool and Dry Place. Preferably in a sealed container and should not be exposed to direct sunlight.
15gm, 30gm, 90gm, 375gm, 750gm, 1.5kg, 7.5kg