Mild chemical resistance
Dust free surface
Anti-slip & anti-skid finish
Mix all the material in the appropriate proportion as per described on the product manual
Over various shawar epoxide primers, If applying over raw concrete firstly remove dust from the surface. Then apply a water jet and make the surface clean from various sticky dust particle. Now apply the light conc HCL or Acetone to degrease the surface and then clean it with water after 2-3 hours of applying acid
Precautions & Limitations:
Professionals should Wear personal protective equipment (PPE). Avoid contact with the eyes and skin. In case of direct contact and irritation, it should be washed off immediately with soap and warm water. Avoid breathing vapours, mist or gas.
Over various Shawar epoxide primers
Spills & Disposal:
In case of spills, sweep up and shovel the spilled material. Keep spilled material in suitable, closed containers for disposal. Soak up with an absorbent such as clay, sand or other suitable material. Flush area with water to remove trace residue. Do not allow the product to reach the sewage system. Waste must be disposed of in accordance with federal, state or local regulations, as applicable
As per described on product packaging
Varies with applied film thickness
As per shade card
Storage & Handling: Keep In a cool and Dry Place. Preferably in a sealed container and should not be exposed to direct sunlight.
Dosage: info needed(No)