SSS 300
SSS-300 is standard Epoxy Screed which is filled by three parts flooring screed. When applied on concrete surface, it gives a high strength flooring. It is capable to withstand high loading, wear and tear.
Indoor and outdoor areas
Washroom
Hospitals
Operation Theater
Sterilization rooms
Restaurant And Cafeteria
Light industrial application
Excellent mechanical strength
Forms seamless surface
Hygienic
Hard wearing
Anti-slip & anti-skid finish
Mix all the material in the appropriate proportion as per described on the product manual.
Surface Preparation:
Over various shawar epoxide primers.If applying over raw concrete firstly remove dust from the surface, then apply a water jet and make the surface clean from various sticky dust particles. Now apply the light conc HCL or Acetone to degrease the surface and then clean it with water after 2-3 hours of applying acid.
Precautions & Limitations:
Professionals should Wear personal protective equipment (PPE). Avoid contact with the eyes and skin. In case of direct contact and irritation, it should be washed off immediately with soap and warm water. Avoid breathing vapours, mist or gas.
Technical Information
Other Information
Substrate:
Over various shawar epoxide primers
Spills & Disposal:
In case of spills, sweep up and shovel the spilled material. Keep spilled material in suitable, closed containers for disposal. Soak up with an absorbent such as clay, sand or other suitable material. Flush area with water to remove trace residue. Do not allow the product to reach the sewage system. Waste must be disposed of in accordance with federal, state or local regulations, as applicable
Mixing Ratio:
As per described on product packaging
Coverage:
Varies with applied film thickness
Shelf Life:
12 months
Colour:
As per shade card
Storage & Handling:
Keep In a cool and Dry Place. Preferably in a sealed container and should not be exposed to direct sunlight.
Packaging:
3kg, 5Kg
