STC 4545
STC-4545 is standard cold applied self levelling top coat over various Shawar epoxy screeds.
STC-4545 is a combination of modified epoxy resin and clear transparent, low viscosity modified hardener. When both components are mixed in recommended ratio, it provides high gloss that are resistant to various chemicals. Low mix viscosity of system permits outstanding mechanical and chemical resistant properties.
Clear coatings
Decorative floor coatings
Laminations
Maintenance coatings
Excellent glossy finish
Good chemical resistance
Light colour
Low mix viscosity
Excellent mechanical strength
Forms seamless surface
First pour the resin in the big vessel, then add hardener into the resin, Mix the material with a slow speed drill for best results
Surface Preparation:
Ensure concrete surface is dry, clean and free from oil, grease and other contaminants. Freshly laid concrete must be cured for at least 28 days. Remove loose particles and dust by wire brush or any suitable mechanical tools. Prior to the application of self-levelling epoxy flooring, it is advisable to seal the concrete pores by shawar epoxy primer and screed system.
Precautions & Limitations:
Professionals should Wear personal protective equipment (PPE). Avoid contact with the eyes and skin. In case of direct contact and irritation, it should be washed off immediately with soap and warm water. Avoid breathing vapours, mist or gas.
Technical Information
Other Information
Substrate:
Over various shawar epoxide screed
Spills & Disposal:
In case of spills, sweep up and shovel the spilled material. Keep spilled material in suitable, closed containers for disposal. Soak up with an absorbent such as clay, sand or other suitable material. Flush area with water to remove trace residue. Do not allow the product to reach the sewage system. Waste must be disposed of in accordance with federal, state or local regulations, as applicable
Mixing Ratio:
As per specified on the product packaging
Coverage:
50-60 sq feet per ltr
Shelf Life:
12 months
Colour:
As per shade card
Storage & Handling: Keep In a cool and Dry Place. Preferably in a sealed container and should not be exposed to direct sunlight.
Packaging:
3Kg
