STCM-5555 is modified epoxy resin available in milky white low viscous liquid and clear transparent, low viscosity modified curing agent. When both components are mixed in recommended ratio, cured films exhibits excellent gloss and free from various defects like fish eyes, craters and air bubbles. Low mix
viscosity of system permits good wetting and leveling properties, high mechanical and resistant to mild acids and alkalis.
Decorative floor coatings
Excellent milky glossy finish
Good chemical resistance
Low mix viscosity
Excellent mechanical strength
Forms seamless surface
First pour the resin in the big vessel, then add hardener into the resin, Mix the material with a slow speed drill for best results
Ensure concrete surface is dry, clean and free from oil, grease and other contaminants. Freshly laid concrete must be cured for at least 28 days. Remove loose particles and dust by wire brush or any suitable mechanical tools. Prior to the application of self-levelling epoxy flooring, it is advisable to seal the concrete pores by Shawar epoxy primer and screed system.
Precautions & Limitations:
Professionals should Wear personal protective equipment (PPE). Avoid contact with the eyes and skin. In case of direct contact and irritation, it should be washed off immediately with soap and warm water. Avoid breathing vapours, mist or gas.
Over various Shawar epoxide screed
Spills & Disposal:
In case of spills, sweep up and shovel the spilled material. Keep spilled material in suitable, closed containers for disposal. Soak up with an absorbent such as clay, sand or other suitable material. Flush area with water to remove trace residue. Do not allow the product to reach the sewage system. Waste must be disposed of in accordance with federal, state or local regulations, as applicable.
As per specified on the product packaging
50-60 sq feet per ltr
As per shade card
Storage & Handling:
Keep In a cool and Dry Place. Preferably in a sealed container and should not be exposed to direct sunlight.